MREL Print Header
Header
Left Side Picture

FIXOR™ Advantages

  • If left unshaken for several hours, FIXOR™ components will separate and the FIXOR™ will not be able to be detonated until re-shaken.

  • Unlike some binary explosives, FIXOR™'s contents are not harmful to the EOD Specialist or to the environment.MSDS Provided.

  • Unlike ammonium nitrate based binary explosives, FIXOR™ is easily and quickly changed from a flammable liquid into a versatile explosive by the EOD Specialist when required.

  • When mixed, the FIXOR™ Explosive has been formally classified as a 1.1D Explosive (UN 0048 – Charges, demolition).

  • FIXOR™ can be detonated by commercial and military detonators, "sensitized" detonating cord with a crimped-on detonator, or ULI knotted detonating cord.

  • Unlike ammonium nitrate based binary explosives and traditional explosives, FIXOR™ Explosive self-neutralizes after a period of time, becoming a non-explosive. This unique characteristic of FIXOR™ is very important to those Customers concerned with the proliferation of explosives-based terrorist devices.
  • FIXOR™ integrates seamlessly with demining/EOD training methods and operating procedures in use worldwide.

  • FIXOR™ is easily and safely deployable by EOD Specialists and indigenous operators.

  • FIXOR™ has no requirement for ongoing field technical support.

  • FIXOR™ training can be provided in theatre or at MREL’s private facility in Canada.

  • FIXOR™ is in stock and available immediately to pre-qualified Governments, EOD Contractors and NGOs performing humanitarian demining and range clearing worldwide.


  • Rended Safe Procedures For Fixor™

    1. Pour out onto a metal tray and allow FIXOR™ to evaporate. Only inert orange powder will remain.
    2. Pour out onto a metal tray and, using an ignition set, burn off the FIXOR™. (unconfined FIXOR™ will not detonate when ignited)

    THE FIXOR™ DIRECTED ENERGY TECHNIQUE

  • The performance of an individual FIXOR™ can be enhanced by filling the FIXOR™ completely with FIXOR™ Explosive by "topping-up" with the explosive from another FIXOR™. This increases the net explosive weight from 400 grams (0.9 lbs.) to approximately 500 grams (1.1 lbs.) per FIXOR™. One (1) FIXOR™ can be used to top-up four (4) other FIXOR™s as follows: mix five (5) FIXOR™s and use one to fill up the other four.


  • The performance of the "topped-up" FIXOR™ is also enhanced by pointing the bottom of the FIXOR™ towards the target. In such cases, the end of the detonator must be inserted 25 mm (1 in.) from the top of the FIXOR™.

  • Limitations Liabilities
    You expressly acknowledge and agree that the use of the technical information contained herein is at the sole risk of the user. Incidental, special or consequential damages that may result from the use or misuse of the technical information contained in the FIXOR™ web site and/or FIXOR™ CD-ROM, is the sole responsibility of the user.

    Product Updates Fixor Home Email to MREL